Posts Tagged ‘node 1’

Node 1 scheduled maintenance

Monday, December 20th, 2010

There will be a scheduled maintenance made tonight, 2010-12-20 starting at 23.00 GMT+1

The reason for this maintenance is that it has been detected that a hard drive in the raid-array is showing signs of being defective.

During the scheduled maintenance window, Node 1 will be taken offline and the defective hard drive will be replaced. When Node 1 is started up again, the raid-array will be rebuilt and then services should return to normal.

It will take approximately 30 minutes to change hard drive, and then the raid-array has to be rebuilt. It is hard to say how long the rebuild will take, but there will be at least a maintenance window set for 5 hours. However, it will most likely go faster than that.

Thank you for your understanding.

2010-12-20, 23:34 GMT+1
UPDATE: All seem to have gone well. The drive has been replaced, the server is back online and the raid-set is being re-synced. If you have any further questions, email info@henleg.com and a customer service representative will get back to you as soon as possible.

2010-12-21, 11:20 GMT+1
UPDATE: The raid-set is synced up and checked.

Node 1 issues

Saturday, November 27th, 2010

Node 1 is not accessible due to an error with it’s filesystem which has gone into read only mode. The datacenter is informed and working on the issue. When further information comes in, it will be posted here.

2010-11-27, 16:11 GMT+1
UPDATE: Services are restored. We have been working with the datacenter to bring the server back up. All services should be operational. If you have any questions, as always feel free to email info@henleg.com and we’ll answer them and help you when necessary.